how to use a come along

Asked by: Jone You

asked in category: General Last Updated: 10th June, 2020

How do you use a come along cable puller?

How to use a cable puller

Step 1 – Disengage main ratchet drive. First, locate the drive pawl spring on the lever handle and pull it to the 'up' position to disengage the main ratchet drive.
Step 2 – Attach load hook.
Step 3 – Release cable.
Step 4 – Release stop pawl trigger.
Step 5 – Attach anchor hook.

Come-alongs are not rated for overhead lifting, but a similar looking device called a ratchet lever hoist is used this way. The original tool of this type was developed by Abraham Maasdam of Deep Creek, Colorado about 1919, and later commercialized by his son, Felber Maasdam, about 1946.

Also, how do you use a come along to tighten a fence? Place the knobbed side of the T-post on the inside of the fence. Unroll the barbed wire along the line of the fence posts. Fasten the wire to one of the corner posts and pull it as tightly as possible to the next corner post. Use a wire stretcher, a mechanical ratchet device, to pull the wire tighter.

Also Know, what is the difference between a chain hoist and a come along?

Lever chain hoists or called come alongs are used for vertical and horizontal movements like pulling, dragging, stretching, and positioning loads up to 10,000 kg (See Pull Lift C85). Its capacity is generally lower than a hand hoist's one. The design of a lever hoist is similar to that of a hand chain operated hoist.

How much weight can a come along pull?

The best part about this product is its working capacity. Its maximum lifting capacity is 4000 pounds, and the safe working capacity is 2000 pounds, which is still more than the maximum working capacity of many products.

31 Related Question Answers Found

How does a come along tool work?

A come along winch tool, also referred to as a power puller, is a handheld device that can conveniently pull and lift objects. The come along winch is most commonly used in addition to levels and pulleys; therefore turning the majority of two-man jobs into a one-man task.

What is a cable puller?

A cable puller handles responsibilities related to pushing and pulling cables for electrical power systems through floors, walls, and ductwork. Their duties are to measure, cut, join, and install wires, panels, and junction boxes.

How do you disengage a ratchet?

Grasp the handle and pull out on the ratchet plate to disengage the ratchet lock. While continuing to hold the plate fully out, rotate the ratchet handle towards the fully open, or flat, position until the plate bottoms against the spring-loaded pawl release.

What is a cable winch puller?

Heavy duty ratcheting cable winch puller is designed for single or double line operation. Use for everything from light vehicle recovery to heavy material handling and auto bodywork. Two-wheel ratcheting gearbox. 1/4 in.

Who makes the best come along?

TEKTON 5547 4-Ton Dual Gear Power Puller. The TEKTON 5547. Our top choice for the best come along winch in this review is the Tekton 5547 4-Ton Dual Gear Power Puller. Maasdam Pow'R Pull 144S-6. The Maasdam Pow'R Pull 144S-6. ABN 2 Ton Single Gear Hand Puller. The ABN 2 Ton Single Gear Hand Puller.

How do you use Maasdam Pow R Pull?

USE ONLY 1/2" ROPE. 1-5 Grab end of rope underneath black spring, pull to length of approximately 12" and insert snugly between ratchet wheel and ratchet guard. 1-6 Repeatedly move handle back and forth until rope comes out other side of guard. KEEP HANDS AND FINGERS AWAY FROM MOVING PARTS!